Sonoma Model 1 静音耳机

HiFi秀 | 2017-11-16

以DSD编辑工作站闻名的录音器材厂商Sonoma,竟然也投身静电耳机市场,推出Model 1静电耳机,至于搭配Model 1的DAC以及耳扩,使用了ESS SABRE生产的DAC芯片,以及AKM顶级的ADC芯片,并搭配64位元的DSP电路,原厂声称可支持各式Hi-Res音档格式。

耳机市场不断成长,尤其近年来越来越多厂商推出静电耳机,打破静电耳机由少数一两家厂商寡占的局面。以DSD编辑工作站闻名的录音器材厂商Sonoma,竟然也投身静电耳机市场,推出Model 1静电耳机,大大出乎众人的意料。

Sonoma Model 1

原厂在其官网说道,Model 1静电耳机系统是专为Hi-Res音档设计而出的耳机系统。在Model 1的耳机本体中,单元采用英国Warwick Technology开发而出的 High-Precision Electrostatic Laminate Transducer(高精度静电镀膜换能器,简称HPEL),振膜厚度仅有15 μm,具有高效率极易驱动的特点,而且贴附在蜂巢结构的框架上,该框架的大孔洞设计,可减少对声波的影响。此外,Warwick Technology声称掌握了可以大量生产HPEL单元的技术,降低生产成本,而且全程在英国制造,对耳机玩家而言,无疑为一大利多。

Sonoma Model 1

Sonoma Model 1

至于搭配Model 1静电耳机的DAC以及耳扩,使用了ESS SABRE生产的DAC芯片,以及AKM顶级的ADC芯片,并搭配64位元的DSP电路,原厂声称可以支持各式Hi-Res音档格式。至于扩大电路,采用同样由Warwick Technology设计的「Energizer」放大电路,除了能提供静电单元所需的极大偏压,针对HPEL的阻抗特性,在低频段提供大电压摆幅,而在高频段提供大电流,驱动HPEL单元,达到低失真的目的。

Sonoma Model 1

Sonoma Model 1

Sonoma Model 1

Sonoma官网上并没有公布太多Model 1的相关信息,但是已在国外许多耳机网站掀起不小的讨论,值得关注。

Sonoma Model 1

THE HEADPHONE
Configuration:Open-back, circumaural type
Transducer:HPEL, single-ended electrostatic
Effective Diaphragm Area:3570 mm2
Frequency Response:10 Hz ~ 60 kHz
Output Level:Compliant with EN 60065/A12:2011 (EN50332) when driven by M1 Energizer/DAC (for all inputs)
Ear and Headband Cushions: Cabretta top-grain, sheepskin leather
Input:Polarized, 4-pin, self-latching connectors for left and right channels
Drive Cable:Ultra-low capacitance, silver-plated OFHC copper, with foamed PE insulation and Kevlar reinforcement; 2 meter length
Weight:303 grams (10.7 oz), without cable
DAC & ENERGIZER
USB Input:USB 2.0 type B; accepts digital audio formats up to 32-bit/384 kHz PCM and DSD via DoP (DSD64/DSD128)
Digital Coaxial Input:S/PDIF; accepts digital audio formats up to 24-bit/192 kHz PCM
Analog Input (High Level):Dual RCA; 2.1 Vrms
Analog Input (Low Level):3.5 mm; 850 mVrms
DAC:Dual mono, 32-bit/384 kHz DACs with balanced outputs
ADC:32-bit/384 kHz multi-channel ADC with balanced input buffers
Digital Signal Processing (DSP):64-bit (double-precision) fixed-point processing at native sample rates
Amplifier/Energizer:Discrete FET, single-ended, high-bias Class-A output
Distortion + Noise:< 0.05%
Bandwidth:> 65 kHz
Enclosure:CNC-machined 6063 aluminum
Power Supply:External: 24 VDC, 60 VA, fixed frequency, class B-compliant SMPS;
Internal: fully isolated, ultra-low noise linear regulation
AC Mains:World voltage compatible (90-264 V, 50-60 Hz); IEC-60320 C14, earth-grounded power cable; 1.5 meter length
Dimensions(H x W x D): 57 mm ×190 mm ×290 mm 
Weight:2.45 kg (5.40 lbs)


分享达人请扫描上面二维码,关注“HIFI秀”微信
意见领袖请进入“微博”>>

您可能感兴趣的产品

    • - 成立时间:
    • - 所属国家:日本
    • - 创 始 人:
    • - 官 网:https://www.sonomaacoustics.jp
    • - 地 址:国際貿易事業部 〒113-0034 東京都文京区湯島1-2-5
    • - 电 话:0570-035340
    • - 邮 件:
    • - 微 博:
    • - 微 信:
    • + 关 注